The effect of orientation of square perforations on the heat transfer enhancement from a fin subjected to natural convection

The heat transfer dissipation from a horizontal rectangular fin embedded with square perforations of two orientations under natural convection is numerically investigated. The parameters considered in this investigation are the geometrical dimensions and the orientations of the perforation. A comparison between heat dissipation of the fin with variable orientations of the perforations is presented. It is found that the heat dissipation enhancement from a fin with square perforation parallel to the fin base was more than that of fin with inclined square perforation. The problem of this study was numerically solved using the variational approach finite element technique.     

Void fraction measurement by X-ray absorption

An X-ray tube and scintillation detectors were mounted on test pipes containing static voids of air–water mixture. Due to fluctuations in the X-ray tube output, void fraction measurements were carried out by using two detectors, one as a reference and the other as a void monitor. The intensity of a narrow (30–100 kV) X-ray beam transmitted through test pipes of different I.D. was measured to obtain the void fraction. The uncertainty in measuring static void fraction, was found to decrease as the void fraction increases, and to increase as X-ray energy increases. It was found that for a certain test-section pipe diameter, there exist an optimum X-ray energy that gives a minimum uncertainty in void fraction measurement.     

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐Fused Calix[4]pyrrole

Tetrakis(bicyclo[2.2.2]oct‐2‐ene)‐fused calix[4]pyrrole, 5 , was obtained starting from (E)‐1,2‐bis(phenylsulfonyl)ethylene. This new calixpyrrole derivative is the prospective precursor of tetrabenzocalix[4]pyrrole, a potential ion‐pair receptor and an attractive species as a possible deep‐walled ‘molecular container’.     

In vitro studies of carbon fiber microbiosensor for dopamine neurotransmitter supported by copper-graphene oxide composite

A composite was prepared from copper and graphene oxide (Cu-GO) by in-situ chemical reduction of a mixture containing GO and Cu(II) ions with potassium borohydride. The morphology and structure of the composite were confirmed by various physicochemical techniques. The materials were used in a tyrosinase-based microbiosensor where the enzyme is immobilized in a biocompatible matrix consisting of poly(ortho-phenylene diamine) and Cu-GO. The composite was deposited on the surface of an 8-μm thick carbon fiber microelectrode. The role of each component in the sensing layer was systematically investigated with respect to the analytical performance of the system. In its optimal configuration, the biosensor demonstrated (a) a sensitivity of 6.1?±?3 nA mM^-1 dopamine (DA), (b) a linear response to DA (with a Michaelis-Menten constant of 0.29?±?0.03 mM), (c) good selectivity over ascorbic acid and uric acid, and (d) a high blocking capacity (112.2?±?2 mM) for ascorbic acid.

Determination of some organophosphorus and azole group pesticides in water samples by dispersive liquid-liquid microextraction coupled with GC/MS

A dispersive liquid-liquid microextraction (DLLME) procedure coupled with GC/MS detection is described for preconcentration and determination of some organophosphorus and azole group pesticides from water samples. Experimental conditions affecting the DLLME procedure were optimized by means of an experimental design. A mixture of 60 microL chlorobenzene (extraction solvent) and 750 microL acetonitrile (disperser solvent), 3.5 min extraction time, and 7.5 mL aqueous sample volume were chosen for the best recovery by DLLME. The linear range was 1.6-32 microg/L. The LOD ranged from 48.8 to 68.7 ng/L. The RSD values for organophosphorus and azole group pesticides at spiking levels of 3, 6, and 9 microg/L in water samples were in the range of 1.1-12.8%. The applicability and accuracy of the developed method were determined by analysis of spiked water samples, and the recoveries of the analyzed pesticides from artesian, stream, and tap waters at spiking levels of 3, 6, and 9 microg/L were 89.3-105.6, 89.5-103.0, and 92.0-111.3%, respectively.     

Determination of capsaicin and dihydrocapsaicin in Capsicum fruit samples using high performance liquid chromatography

The aim of the present study was to determine the content of capsaicin and dihydrocapsaicin in Capsicum samples collected from city markets in Riyadh (Saudi Arabia), calculate their pungency in Scoville heat units (SHU) and evaluate the average daily intake of capsaicin for the population of Riyadh. The investigated samples consisted of hot chillies, red chillies, green chillies, green peppers, red peppers and yellow peppers. Extraction of capsaicinoids was done using ethanol as solvent, while high performance liquid chromatography (HPLC) was used for separation, identification and quantitation of the components. The limit of detection (LOD) of the method was 0.09 and 0.10 μg/g for capsaicin and dihydrocapsaicin, respectively, while the limit of quantification (LOQ) was 0.30 and 0.36 μg/g for capsaicin and dihydrocapsaicin, respectively. Hot chillies showed the highest concentration of capsaicin (4249.0 ± 190.3 μg/g) and the highest pungency level (67984.60 SHU), whereas green peppers had the lowest detected concentration (1.0 ± 0.9 μg/g); green peppers, red peppers and yellow peppers were non pungent. The mean consumption of peppers for Riyadh city population was determined to be 15.5 g/person/day while the daily capsaicin intake was 7.584 mg/person/day.     

Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol

Some acidic chiral templates were used to prepare open tubular (OT) molecule imprinted polymer (MIP) capillary columns to explore the effects of molecular structures of templates on chiral recognition capabilities and to verify the feasibility of the general MIP preparation protocol introduced in the previous study. The templates are phenyl carboxylic acids and their derivatives. Optimization was carried out for chiral separation of template enantiomers for each MIP column through varying pH and composition of eluent. It was found that the preparation protocol can be successfully applied for the appropriate templates with functional groups fulfilling the three-points interaction rule. The chiral separation performances were quite satisfactory for MIPs of such templates although they are yet inferior to the separation performances of the MIP columns fabricated with the templates of profen drugs (2-arylpropionic acids with a large substituent on the phenyl ring). Subtle variations of the template molecular structures have been found to be critical to enhance chiral recognition ability of the resultant MIP column.     

Synthesis, structure investigation, spectral characteristics and biological activities of some novel azodyes

Four novel azo compounds were synthesized; o-phenylazo- (C(14)H(13)N(3)O(2)) (I), p-bromo-o-phenylazo- (C(14)H(13)BrN(3)O(2)) (II), p-methoxy-o-phenaylazo- (C(15)H(16)N(3)O(3)) (III) and p-nitro-o-phenylazo-p-acetamidophenol (C(14)H(13)N(4)O(4)) (IV). These compounds were carefully investigated using elemental analyses, UV-vis, FT-IR, (1)H NMR and mass spectra. Also, the effects of p-substituents such as bromo, methoxy and nitro groups on the mass fragmentation pathways of these dyes were studied using Hammet's effects. This research aimed chiefly to threw lights on the structures-stability relationship of four novel newly prepared azo derivatives of p-acetoamidophenol. The data obtained referred to the variation of mass fragmentation pathways with the variation of p-substituent of these dyes which can be used in industry for various dyeing purposes. This variation is also correlated and verified by molecular orbital calculations which were done on ionic forms of these dyes using semi empirical PM3 program. The biological activities of these dyes were also investigated and its structure relationship was correlated.     

Reactions of some new thienothiophene derivatives

Facile and convenient syntheses of bisdimethylthieno[2,3-b]thiophen-2,5-diyl bis(oxazole-2-amine), bis(1H-imidazol-2-amine), bis((3a)-H-indole),[1,2-a]pyrimidine), bis(1H-imidazo[1,2-b][1,2,4]triazole) and bis(9H-benzo[d]imidazo[1,2-a]imidazole) derivatives incorporating a thieno[2,3-b]thiophene moiety from the versatile and readily accessible 1,1'(3,4-dimethylthieno[2,3-b]thiophene-2,5-diyl)-bis(2-bromo-ethanone) (1) are described.     

Theoretical study on the reaction of hydrogen atoms with aniline

The reaction of aniline with hydrogen atom is investigated herein using the hybrid meta-DFT functional of BB1 K. Hydrogen atom is found to preferentially add at an ortho position. However, the fate of the o-(C₆H₅NH₂)H adduct is found to be solely the deactivation of the initial addition channel. The rate constant for the abstraction channel (C₆H₅NH₂ + H → C₆H₅NH + H₂) is fitted by the expression 1.10 × 10⁻¹¹ exp(−4,200/T) cm³ molecule⁻¹ s⁻¹. Our calculated rate constant for the abstraction channel agrees very well with the available experimental measurements. Satisfactory agreement is found between calculated and experimental measurements for the displacement channel (C₆H₅NH₂ + H → C₆H₆ + NH₂). Our detailed analysis for the corresponding displacements in toluene and phenol suggests that the three systems exhibit similar behavior with regard to the relative importance of abstraction and displacement channels.